G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

Product Information

Taper threads, British Standard Pipe Taper thread ( BSPT), whose diameter increases or decreases along the length of the thread; denoted by the letter R.

This thread type, standardized by ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers), is typical among North American measuring instruments, found in piping systems, pumps, compressors, plumbing systems, mobile working machines, and many more applications. Im trying to put a pressure gauge on a 55 gallon drum ,i put pressure in the tank but not one pressure gauge will work ,i put the gauge on the top of the tank ,right on the lid , and it wont give me the pressure . The FL2S-MC series are straight fittings with NPT, G, R, metric or metric canonical male threads to a either a compression ring or cutting ring connection point.Often the 2nd P is left off because BSPT tapered threads are less common and BSP is assumed to be parallel unless otherwise specified.

It has been adopted as standard in plumbing and pipe fitting, except in North America, where NPT and related threads are used. Choose this straight adaptor from RS PRO for leak-free and stable connections for your pneumatic system. Due to the spiral leak path, however, Teflon® tape (PTFE) or a sealing compound is required to create a good seal. If the pressure is not going to exceed 16 bar we would suggest a John Guest PM010612E 6MM x 1/4″ straight threaded to tube adapter fitting. If everything is piped and connected correctly and provided that the right pressure range was selected you should see a reading on the pressure gauge.If accuracy is critical, base your final decisions on the data provided in the root document: ISO 228; which is a copyrighted document.

Tri-Clamp fittings are designed to reduce the presence of crevices which encourage bacteria growth and make it easier to clean the surfaces which are in contact with the process media. BSP Male DIN16288 and G1/4 Male EN837 are a couple of examples of how this style of connection is described.The taper is 1:16, meaning that for each 16 units of measurement increase in the distance from the end, the diameter increases by 1 unit of measurement.