Bandai Hobby BAN230363 Char's Counterattack Sazabi RG 1/144 Model Kit, Red

Product Information

The Hasegawa hologram finish sheet is attached to the forehead sensor, and it is painted in clear green from above. The detail of the mono eye is improved with the aurora and SP plate of the GEM dome which is a high queue part. Slight variations in the item's final appearance and color may occur. Some items are hand-colored, so the colors may be uneven. We’ve talked about Amuro Ray, and we’ve talked about Kamille Bidan, and now we have to talk about the connective tissue that binds them together. Other than uhh, the direct connection they have, from working together and knowing each other. Look, I didn’t think this bit all the way through, but roll with me. Rival to Amuro, mentor to Kamille, it’s everyone’s favorite ice cold psychopath from outer space: the Red Comet himself, Char Aznable.

For the exterior red, I compared the finisher’s red paint and chose the color of my choice. I used Silk Red and Lumi Red, and I think it’s a brighter than the molding color. Originally I wanted to divide red into three colors like MG, but it was troublesome, so I finish with two colors. One of the least-grounded technologies in Gundam, the psychoframe is a kind of psychically-reactive metal. It’s never explained how any of this works, but the upshot is that if you think hard enough about murder while sitting inside a Faraday cage, you become a wizard. Neo-Zeon developed it for the Sazabi exclusively, but here Char’s evil masterminding runs directly aground on his self-defeating dipshit tendencies. Classic. What happens is that after thrashing Amuro in an early battle, he decides that it would be cool to have a “fair fight”, and just gives him the plans for the psychoframe. This has two major consequences, one that anyone could have seen coming, and another less predictable. In case the product, there may be cases, under certain situations, where the delivery date is changed or delayed , the company cannot take responsible for any loss or detriment involved in the use of the service. I built this kit over the course of two sessions, the first being nearly six hours and the second about an hour and a half. I don't recommend building this kit in this way; this build really deservesto be savored.As an Online only retailer we act with integrity & honesty whilst delivering exceptional customer service. A twin pipe is embedded in the muzzle, and the sensor on it is laminated with two hologram finish sheets painted in clear green.

Due to the limited production run, we will stop accepting applications for reservations once the quantity available is fulfilled. I know I keep yammering about how heavy these metal parts are, but now that it’s 95% assembled, I really can’t stress enough what a dense piece this is. Beam Tomahawk can be mounted on the shield. In addition to the beam saber, beam blades for beam tomahawk come with different shapes, so you can enjoy various effects by recombining. Delivery of actual product may be delayed due to unforeseen circumstances and the company will notify you of the anticipated delivery date to your account. We are here to help you discover happiness, peace and your creativity through this amazing hobby of Gunpla!There isn’t anything bad to say here. The RG Sazabi looks great, poses better, comes with good accessories, and is big as hell. It’s an amazing piece of GunPla, managing to be an easy (if somewhat lengthy) build, despite the sheer volume of parts. It’s just a great kit, and was probably the best Real Grade until the Nu Gundam came out and immediately overthrew it. Some things never change.

After enjoying episode 7 of Last of Us with the wife this evening I sat down to power through the rest of the legs with the goal of at least getting this behemoth standing on its own feet before the end of the weekend. Unfortunately some of the color-accuracy is lost in the translation to clear parts – there should be a couple of shades of red here, and with the clear plastic there still is, but it’s impossible to see the different shades with the naked eye. Styling is reminiscent of the Ver.Ka design, but different in spots. A few of the flourishes and opening panels made it, but not all of them. It’s a nice design, and still similar enough that often the only way to tell the difference between the MG and the RG in photographs is what gun it’s holding: if you see the rifle, that’s the MG, but if you see the shotgun and have nothing else to provide a sense of scale, it could go either way. Apparently, some builders have encountered issues during the assembly of the chest and shoulder connection. The three segments of this joint are each directional, so pay close attention to the instructions when building this segment. Additionally, when inserting the joint into the chest, it needs to be pushed all the way down into the peg. In a partially assembled state this area is a bit fragile; use common sense and be gentle!We actively encourage & support community building through our social media and appearences at community events. There are some challenges, like fitting all of the pins and pylons up exactly between two opposing shell parts. No different than the difficulties you’d expect with their plastic counterparts, but obviously since there’s no give in the metal whatsoever it just takes a bit of finesse to get it right. Aside from that, some of the plastic pieces are an extremely tight fit into the holes on the metal parts, but while that’s frustrating going together it will be for the best in the long run. It’s also very easy to cross thread the cheap screws included in the metal kit, so it’s worth taking the extra steps to spin them left a few turns before sinking them.

Funnel. The inside is painted in iron colors. The exterior red is also divided into two colors, the feather and the base. Some of the smaller sunken details showing exhaust ports or implied light lenses are almost impossible to clean up any wash that didn’t stay neatly in the lines leaving a sloppy look to those small areas. Since it is an RG, it has many movable parts, and it is good that it can reproduce more human-like natural movements. It is easy to handle, so it is easy to pose, and it will flexibly respond to any poses. (During assembly, grease is applied partially to make it easier to move.) The weapon and the specialized manipulator from the Long Rifle for HGUC Moon Gundam can be used on this Gunpla. Since it comes with a flat hand, you can reproduce the reloading effect by attaching it to the barrel grip of the beam shot rifle.

Since the product has a limited production run. When the number produced has been reached, we will stop accepting applications for reservations. Later reissues of the Gunpla from September 2018 onwards will feature a blue-colored Bandai Spirits logo. Later reprints from mid-2022 will also feature a Bandai Namco logo.