i-tec USB-C Docking Station 2x4K - 2x DisplayPort 1x USB-C 3x USB 3.0 2x USB 2.0 1x GLAN 1x Audio/Microphone

Product Information

The workstation supports output to up to two external monitors, and any laptop with a Thunderbolt or USB-C port (with video transfer support) can be connected. Note: macOS does not support Multi Stream Transport (MST) technology. Connecting two monitors to the station on macOS will result in both monitors showing the same image. DIsplayPort, 1x HDMI & 1x VGA supporting up to three external displays or single 4K/30Hz display. macOS supports a single extended display only. DisplayPort and 1x HDMI supporting up to single 4K/60Hz or dual 2560×1440/60Hz displays (depending on host performance). macOS supports a single extended display only. Gigabit Ethernet RJ-45 provides reliable, robust and high-speed Internet connection supporting 10/100/1000 Mbps speeds

Provides up to 85W Power Delivery for compatible USB-C and Thunderbolt laptops & tablets. The host device must support USB-C Power Delivery. Power: PC1 port – up to 100W (additional USB-C power adapter is required to power through this port) DisplayPort supporting up to dual 4K/60Hz or a single 5K/60Hz display (depending on host performance). macOS supports a single extended display only. USB 3.1, 1x USB-C 3.1 and 2x USB 2.0 for easy connection of your USB devices and peripherals. Gigabit Ethernet RJ-45 provides reliable, robust and high-speed Internet connection supporting 10/100/1000 Mbps speedsUSB-C 3.1 port to connect other USB-C devices, supporting a data transfer rate of up to 5 Gbps. To be used also as Power Delivery port for charging all notebooks, tablets, and smartphones with Power Delivery support. Answer: The Ethernet connection must be supported directly by the tablet manufacturer. You can easily verify the support in the set-up “Network Connections” – “Other Networks” – and the option “Ethernet” must be located here. Therefore, a passive (unpowered) cable/adapter cannot be used under any circumstances. Passive cables/adapters can only convert DisplayPort signals to HDMI.

Supports all devices with the USB-C interface with “DisplayPort Alternate Mode” and „Power Delivery”, or Thunderbolt 3 port Dlatego w żadnym wypadku nie można używać pasywnego (niezasilanego) kabla/adaptera. Pasywne kable/adaptery mogą jedynie konwertować sygnały DisplayPort na HDMI. Pytanie: Moje wyjście wideo (HDMI, DisplayPort, DVI…) nie działa po podłączeniu do MacBooka lub po zainstalowaniu sterowników DisplayLink. Pytanie: Podłączyłem standardowy mikrofon analogowy do połączonego portu audio stacji dokującej, ale mikrofon nie działa. Dlaczego?For macOS, there are 4 conditions that must be met to prevent the MacBook from shutting down. The MacBook needs to be connected to power, an external keyboard, mouse and monitor. And then the MacBook lid can be closed and only the external monitor can be used. Fast network and Internet access with Gigabit Ethernet RJ-45 port, supporting 10 / 100 / 1000 Mbps speeds DisplayPort and 1x HDMI supporting up to dual 4K/60Hz or a single 5K/60Hz display (depending on host performance). macOS supports a single extended display only. Therefore, a passive (unpowered) cable/adapter cannot be used under any circumstances. Passive cables/adapters can only convert the DisplayPort signal to HDMI. Not all devices/systems with USB-C interface support the full standard functionality. Please ensure that your USB-C device supports DP alt mode and USB Power Delivery.