Amazon Basics 16-Gauge Speaker Wire 1.3 mm² - 30.48 m (100 feet), Bronze

Product Information

Folks tend to notice that their music is more dynamic overall than it was with more budget-friendly cables. If you decide to hook up your wire without connectors, use a wire stripper to take about 3/8-inch of insulation off the ends of each lead, exposing the bare wire strands. From left to right: bare wire, pin connectors, spade connectors, single banana connectors, dual banana connector. The easiest way to measure the distance of your cable run is to simply take a string from the source to your speakers.

For indoor speakers, make sure you are using cabling that has the proper UL rating for your situation. If you are using 8-ohm speakers, 16 AWG wire is recommended for runs up to 48 feet and 10 or 12AWG wire for runs up to 200 feet. conductor cables are most commonly used for having an external volume control or multiple speakers set up in different parts of a room. This whitepaper overviews cable reel management and discusses the critical elements of a successful cable reel management program, including handling, transportation.This provides a more secure connection than binding posts, but it will depend on which type of connector your speakers require. Always read the instructions for information about care and usage as different speakers have different capabilities. It defies logic that one wire of a given gauge could be better than another, but I can tell you that it is absolutely true. With 16ga you'll be cruising along and then a song you really like and crank it up and your amp will say "I can't do that" and take a dump.

We still believe that the gold standard for auditioning speakers is hearing them in your own environment — that’s why we offer a 60-day money-back guarantee.Speaker wires did not exist on the market for most of the 20th century, though speaker systems were very much the thing. Depending on where you live, the time it may take for your exchanged product to reach you, may vary. Bill -- The great thing about home audio is that 4 people can listen to the same speaker and come up with 4 different opinions - too bright, too dull, a little boomy in the bass, could use a little more bottom. My house was pre-wired with 18 gauge with about 50 runs to some mini Klipsch speakers and that worked.

To put it in other terms, think of speaker wire as the arteries of your system, with your receiver being the heart and your speakers being the extremities.After you know the length of your run and the power requirements, you can select the proper gauge wire for your job. I was a complete skeptic about audiophile cables until I started assembling my own home audio system.

It's there a way to safely wire one speaker in mono using the speaker wire, either at the speaker or the amp? A speaker cable is an electrical cable with two or more copper or silver sheathed conductors that transfer the information between the amplifier and the loudspeaker. In equal power mode, you'll hear these differences in loudness as they naturally occur between speakers.

This is to ensure your home stays safe when the cabling is placed near potentially flammable materials within your ceiling or walls.