Universal Car Amplifier Bass Knob Control Via RCA RCA Audio Interconnect LC-1

Product Information

But if you did it that way then you'd be getting into clipping assuming you had properly set your gain to the proper level to begin with.

Reason for that was the bass knob being installed caused the noise so I though it would be most effective to install it after the knob.Although the EBC is essentially a remotely located gain control, it is still important that you still set the internal gains on the amplifier first. Our experienced and knowledgeable staff are always ready to assist you in finding the perfect amp remote bass control knob for your specific setup. To maintain sound quality and protect your audio system, use the remote bass control knob moderately and make sure the amplifier settings are appropriately tuned for your vehicle's acoustics. With an amp remote bass control knob, you don't have to reach for your amplifier every time you want to adjust the bass levels.

Adding an amp remote bass control knob to your car audio setup provides a convenient and accessible way to fine-tune the bass response according to your preferences. So before you go cranking on your EBC knob, make sure you aren’t sending a square wave to your subwoofers. If you are a long time veteran, feel free to use this as a form to discuss with other like minded enthusiasts. wow what a difference it is with the amp redone up the sound is 10x cleaner and almost louder than before.Some remote bass control knobs come with mounting accessories or brackets to facilitate installation in various locations. So it sounds like those of you that do use bass knobs use them as a volume/gain control rather than an eq/frequency boost? Amp remote bass control knobs, also known as bass level controllers or bass remotes, are compact and user-friendly devices designed to give you precise control over the bass output of your car audio system. I watched people on YouTube set the gains when using a bass knob, and the knob should be set to max when you set your gain. All you have done by turning the gain up is allowed the head unit to become "louder" with less effort, but it does not increase the maximum output by any means, your gain should be set to match your head unit voltage pre outs, which is the point of maximum output before clipping, then leave it there.

Something that's always bugged me is the centre frequency of both bass and 'treble' knobs is often 'off', to my taste -- the bass is usually set too high (more 'mid-bass', really).Our wide variety of bass and level remotes offer you a quick and easy way to adjust the bass to compensate the variations of genres you are listening to. Common mounting locations include the dashboard, center console, or even on the steering wheel column. I need to split them after the bass knob so i have 4 individual RCA plugs to plug into the amplifier's 4 channel RCA inputs.

There's a thin line to be crossed, when the upgrades to your vehicle increase your chance to get tickets by an amount exponential enough to stop worrying and build the fastest, loudest car you can. but I need a bass knob with two inputs and two outputs of RCA's and i can only find ones with left and right. I've always been told that kicker is "top of the line sound quality" and that statement is 100% true! When you turn the knob clockwise, the bass level increases, and turning it counterclockwise decreases the bass output. EDIT - see the attached from the MS-A5001 manual, it's not in the MS8 manual as I originally thought.

Our selection is extensive and each product has full performance documentation showing real power figures and current consumption. BUT if the volume does not change and you can adjust the bass down for a certain song and then raise it back up then it is doing the same work as a volume knob would. An external bass controller (EBC) will allow you to adjust the bass level without having to pull over and adjust the gain setting on the amplifier.