Wykamol Thermaldry Anti-Condensation Coating (5 Litre Single Tub)

Product Information

You may be wondering what options you have when it comes to insulating paints. Here are the best insulating paints available in the UK, both for interior & exterior surfaces. The Best Exterior Insulating Paint These glass bubbles (or spheres as they are also known) create a thermal barrier between the air in the room and cold wall surface once the paint has dried. It is also advisable to leave the electric ventilation system on for at least four hours a day. If your house has air vents in the walls, don’t obstruct them. Modern vents are designed to prevent heat dissipation but at the same time they ensure a proper ventilation.

By incorporating Micro-technology in the form of hollow glass beads ( with a size of 50um and a crush strength of 500 psi), these beads act like a miniature ‘Thermos Flask’, reflecting thermal energy away from the walls, preventing the water from condensing, forming on walls and growing mould. Be sure not to apply too thinly and for the best results you will need atleast 2 coats. For wall and ceiling preperation make sure you remove any mould first with a strong mould killer and once dry sand down any imperfections on the surface before applying this paint. If you are looking for a coloured finish, Emperor Masonry Paint has 12 popular exterior colours to choose from, including white, off-white & witney cream. This range includes a number of neutral shades, plus some pastel shades such as light pinks, blues & greens.

Signature required on delivery.

Depending on the surface porosity (how absorbant the surface is) coverage for WarmWall is between 8 – 10m² per litre per coat

An affordable anti-condensation paint from Polycell. Damp Seal is an anti-condensation undercoat formulated to seal the damp patches on interior walls and ceilings. The product is recommended by Dulux and has an outstanding quality despite the low price. HQC is an outstanding anti-condensation paint specially formulated to act as an insulator – reducing the heat loss in your home while preventing major condensation problems such as discolouration, blistering and staining. To eliminate condensation from occurring you need to identify the cause of such problems and ensure that you have done everything possible to eradicate the issue. For an exterior thermal paint, look no further than Emperor Masonry Paint, which contains super hydrophobic technology that is water repellent, highly breathable & proven to keep walls 6°C warmer on average compared to untreated walls. Emperor Masonry Paint is also verified by the Energy Saving Trust following their independent review process.Allow 2-4 hours between application of coats. A two-coat application is necessary to achieve maximum effectiveness. There are a number of circumstances where applying an insulating paint can be particularly effective. Our favourite trait was that, although the paint can be coated over with emulsion, it has a beautiful finish on its own. Benefitting from agents that reduce discolouration from moisture, Coovar delivers long-lasting results. The paint is dry to touch in 1-2 hours in a warm room and can be re-applied in just 4 hours for a second coat. Expect a paint coverage of 13m2 per Litre from the Ronseal anti-mould paint. For an interior thermal paint, we highly recommend Suretherm Anti Condensation Paint, which contains glass microspheres which allow it to absorb heat. By retaining heat twice as long as a standard emulsion paint, Suretherm uses this heat to prevent the formation of condensation. As well as preventing condensation, the heat that is retained within the emulsion acts as an insulating layer on the internal wall, reducing heat loss.

On the tin itself it reports that it should not be used as an undercoat and if any other paint is applied over it will limit its effectiveness to prevent mould and condensation from forming. If you are returning a worn garment that you feel may have developed a fault the cost of return will be the customers resposibilty and please remember the garment must be washed before sent, any garment returned unclean will be rejected.The application of paint depends on the paint you are using, however there are a number of similarities. The most important similarity is that preparation is crucial. It can be tempting to save time by getting straight on with the painting, however that can compromise the quality of the finish and the performance of the paint. This white matt anti-mould paint from Ronseal has been specially created to give a great long-lasting finish to a different range of surfaces.

The Dryzone anti-condensation paint is available in 1L and 2.5L tins so you can save money if you are needing to cover a large area. No need to buy multiple small tins. There may be some occasions when it is more efficient or cost effective to have the materials shipped direct from our suppliers to the customer. You will need at least 2 coats for the best finish although you may be happy with the results of just one, to ensure protection from mould definitely complete a second coat of the Ronseal anti-mould paint.

This Variant Includes

However, it should be said that this paint isn’t specifically formulated to stop mould growth or water penetration; you’ll rather need to invest in a specialised product to deal with any of these issues. Need to return a product? No problem! Hopefully you’ll never need to return an item, however, if you do, it is our aim to make this process as easy as possible. Moisture build-up in homes is a common problem for many homeowners in the UK and it’s important to identify the causes before beginning the painting process. Coming in 32 colours, the product can be used either as an undercoat for wallpaper and emulsions or on its own. The colour palette comprises a selection of neutral shades and dramatic tones that dry to a slightly textured matt finish. Thermal paint can improve heat retraction in a room thanks to paint additives that improve surface insulation. It also works like heat reflective paints by reflecting excessive heat away from an external surface or substrate, keeping indoor conditions cooler. In industrial and manufacturing plant situation, thermal insulation paints work in a third way, by preventing heat transfer from one room to a second climate controlled area. Heat gain can be a significant problem for some areas of a workplace, where heat from a processing or steam room is transferred to a heavily staffed area.