Makita LS1018LN/2 240V 260mm Slide Compound Mitre Saw

Product Information

It’s somewhat middle-of-the-road on cost, so you won’t have to pay top dollar, while still getting really great cutting capacities and a professional grade build-quality. MFR warranty included.

And to conclude my Makita LS1018 review I would add this: The saw literally has great features for just about any type of user. Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right) The DIYer can get a lot out of this saw as it would handle about any home-improvement job you could throw at it. Basically, the same benefits as applied to a contractor, only you may not put as many hours on it.Příjemně mne překvapilo kolik pilin skončí v pytlíku, přesto i při použití vysavače jich skončí hodně okolo, ale to je u většiny těchto pil. To ensure the utmost accuracy, Makita have fitted the LS1018LN/1 with a laser guide rail and offer a max bevel range of 45 - 45 º to really get into those intricate cuts. Safety hasn't been neglected as Makita have equipped this saw with an electric brake and a soft start function to minimise the chance of the blade causing injury. Weighing in at 20.6kg this product is surprisingly lightweight and is sold as a single unit.

Double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut You can adjust this saw’s miter angle up to 47° left, and 60° right. These are good ranges and should allow you to achieve just about any kind of miter you would need. The Motor It also can handle a 45° miter cut thru an 8-1/2″ board. So again, really good capacities on the crosscut. Je to bohužel moje první Makita, která mne svým zpracováním zklamala. Konstrukce výrobku je v zásadě fajn, ale vlastní zpracování mnoha detailů je nečekaně mizerné. Uvedu pár příkladů:To ensure the utmost accuracy, Makita have fitted the LS1018LN with a laser guide rail and offer a max bevel range of 45 - 45 º to really get into those intricate cuts. Safety hasn't been neglected as Makita have equipped this saw with an electric brake and a soft start function to minimise the chance of the blade causing injury. Weighing in at 20.6kg this product is surprisingly lightweight and is sold as a single unit.

Thestandard (somewhat poor) dust collection is one of the negatives most people notice. However, this has not been a deal killer for anyone that I’ve seen. And while it doesn’t quite have the vertical board cutting capacity of the Dewalt DW717, it still has a decent fence and can handle most crown molding and baseboard jobs. Even still it doesn’t perform as good as say the Bosch CM10GD, but it does well enough. Just keep your expectations low and you won’t be disappointed! (seriously though, most miter saws dust collection is a joke) Versatility – this saw handles most jobs – but not all This is one of the lightest 10″ sliding compound miter saws. It’s got enough features that there are lighter saws out there, but they still did really good with weight management on thismodel. It goes beyond standard on its miter capabilities, plus it’s a dual bevel, meaning you can change the angle of the blade instead of flipping the workpiece over. Contractors tend to love this feature.tím, že jsou stupnice lepeny, nejdou ani seřídit (kvalitní stroje mají stupnici na plechu a přišroubovanou, stavitelnou)