AquaHouse DI Car Wash water filter, Pure water for Spot Free Rinse Car Valeting & Window Cleaning

Product Information

Aqua Gleam Spotless Car Water Filters are designed with convenience in mind. The filters are compatible with standard hose connections, making them easy to incorporate into your car rinse/drying routine. Simply attach the filter to your hose, spray over the car and leave to dry. FAQs It is important to keep these rinsed areas wet as you complete the whole vehicle, not allowing the vehicle to dry before rinsing a second time using purified water from the in-line filter. Now it’s time for the Aqua Gleam!

b) Reverse Osmosis (RO) -is produced by forcing the solvent (water) through an ultra fine membrane (filter) under pressure (leaving the ion in the water behind) the water system inlet takes water to a pre-cleaner sediment filter, then it is passed through a membrane, which captures the minerals and has to be flushed constantly to wash the minerals from the membrane, and then on to the water outlet to drain. Chlorine will damage the membranes over time, and will eventually "by-pass" the membrane, producing a mildly acidic solution. It requires up to 10-15 gallons producing 1-gallon of pure water. The RO system is slow and not very energy efficient due to its water requirements as opposed to its output of pure water (i.e. 1500 raw water to produce 100 gallons RO water)This water system has a bypass valve that diverts flow away from the filters. This helps in restricting flow to the resin filter bed when deionized water is not needed. The unit has a standard adapter that can be connected to the same size hose. Throughout this article, we mentioned the flow rate. Flow rate is the flow of the water out of the deionizer and hose. The deionizer needs to flow at a specific rate to ensure the deionizer is being efficient.

As mentioned earlier, car washing involves high water consumption. The water nozzle must receive a continuous water flow to maintain the set pressure rate. The water treatment must happen simultaneously with the flow rate. A higher flow rate and lower deionization rate lead to the release of untreated water from the nozzle. The rate is set at 0.5 gallons per minute and can be increased to 1.5 gallons per minute, depending on the system’s capacity. 4. Type Of Deionization This deionizer is equipped with a bypass valve, so you can use regular tap water without needing to alter the setup or your hoses.Imagine you spend hours washing and detailing your car and as it starts to dry, you notice water spots beginning to appear. Distilled water is still pure and uncontaminated. Distillation is the oldest form of purifying water and is far simpler than deionization. Distilled water is more convenient, and distillation removes more impurities than it does eliminate ions. Some people buy distilled water to rinse their cars after washing to prevent spots. We do love that this unit comes fully assembled and ready to go out of the box. However, it is a game-changer and will save a lot of time and energy while washing your car. It leaves the car spotless without having to dry it. The reason we are particularly susceptible to issues such as this during the final rinse is caused mainly due to the impurities and hardness of water. Depending on which region of the UK you reside in, water hardness levels can differ quite considerably, from soft to hard.

You can test the water with a TDS meter also available from our shop. We supplier the filter in two versions to best suite your water area. EV Accessories pure water car wash water filters are approved by PP Protectvehicle ceramic coating specialists.Mains water comes into the unit and is distributed from the bottom head and up under pressure into the resin bed, and as its only outlet is into the pipe, comes through the resin bed to emerge on the outlet side as close to 0 parts per million (ppm) of dissolved solids as possible. Using a hosepipe to wash a car uses approx. 30 litres of water (AutoExpress 21/3/2012), a final rinse only a fraction of that – we estimate 5-7 litres at most.This is a breakthrough in filtered water product for car washing that is proving to be very popular.We recommend that a final rinse is performed at half mains pressure, just sufficient to create a wave of water over the vehicle, and should be able to be completed in around 45 seconds for a standard family car, little over a minute for a 4×4. This is based on our own usage over the last 11 years. Unger has been around in the professional cleaning product market. By keeping the consumer’s needs at the topmost priority, Unger can produce an innovative product range that offers standard quality. No Spots Pro No Water Spots | Pure DeIonized Water for A DI Rinse Ready to Go Right Out of The Box |... The raisin can treat 200 gallons of water before the need for replacement arises. This water system can handle water with a total dissolved solids amount of 200 ppm. The TDS meter can detect these solids’ saturation in the water and display the same. The whole assembly is fitted on a stand that helps in positioning the water system anywhere.

When mineral deposits and chemical contaminants are left on a vehicle’s paint for a long period, they can begin to have a corrosive effect. Many water deionizers require you to drain the water between uses; this mixed bed water deionizer does not require it unless there are freezing temperatures. In the sections, we provide information on water spots and Paint Etching including a solution with our two stages of spot-free de-ionising water filtration system. There are also limits on how much water flow can be pumped through the filter, so be aware of that. You might consider purchasing a flow restrictor to add to this water deionizer.Besides the many advantages of using deionized water for washing your car, deionized water will also help avoid the build-up of salts. The resin will exchange the magnesium and calcium ions found in hard water for sodium ions, which are harmless to your vehicle’s paintwork. Constructed of the finest quality microfibers, the detailing towels set the standard with an outstanding 80/20 blend of polyester/polyamide filament, woven so densely they boast over 200,000 strands of fiber per square inch of fabric! These strands are nearly invisible to the naked eye, and are 100 times smaller than a human hair! Use these cloths for cleaning, buffing, and wiping away wax. The Spot Free Water De-Ionizer Kit is your solution to water spots and micro-marring produced during washing. Remember, if you're washing your vehicle with unfiltered water, you could unknowingly be pouring hard water scale or sediment on the paint finish. This simple, in-line filtration system is an easy way to eliminate the threat of unclean wash water. We often get asked if this is something suitable for those who are in the trade and the answer to that really depends on the volume of work you are getting through. Weighing up the cost effectiveness of the filter vs how many jobs you are carrying out is certainly a worthwhile equation to explore and despite the Aqua Gleam Filter not being recommended for use in conjunction with a pressure washer, filling a mobile tank before hand is certainly a viable option. Using this procedure will then mean when the pressure washer is connected to the tank, all the water that passes through will be freshly filtered in advance for a completely pure wash.