Smartseal Imprinted Concrete Sealer - SILK/WET LOOK - Easy To Apply Driveway Sealer - Durable Protection Outdoor Concrete Sealer for Patterned Imprinted Concrete Driveways and Patios - (5 Litres)

Product Information

After final coat, make sure patio will be protected from rain for several hours. Ideally leave 24 hours of no rain and no traffic on the surface to ensure a full cure. Deep clean the patio approximately one week before applying the sealer. This means power washing the slabs, clearing all dirt, and weeding.

Types of Concrete Sealers Use this comparison chart of concrete sealer types to determine which is best for your project By Anne Balogh, The Concrete Network | Updated August 25, 2021During application, the acrylic-based sealer shouldn’t be allowed to pool, as this can lead to white spots and marks remaining visible once it dries. If spraying on an uneven surface, it can be more difficult to ensure no puddles form, and a brush may be required as well as a sprayer. Just like any other concrete sealer, the length of time that a wet look concrete sealer lasts will depend on a number of factors. Things like the porosity of the concrete, the type of liquid used to cure it, and even the weather can all play a role in how long your wet look sealer will last.

High-gloss finish adds a shiny luster to concrete surfaces; keeps concrete surfaces looking new long-term Natural finish: This is a natural look sealer that is a translucent color. Most of the time you won't see much of a difference between the concrete with and without it, other than the surface being shinier. Made of 100% acrylic, the EnduraSeal Concrete Sealer is a high-quality solvent-based sealer. It produces a semi-gloss finish for a wet look and is suitable for any kind of concrete and can protect colored, stained, exposed, or stamped concrete; stained pavers; stones; and terrazzo. The non-yellowing sealer is highly durable and not only works well as a sealer but also enhances the look of the concrete surface.Ans. This depends on the type of sealer. Urethanes and epoxies are normally costlier than acrylic-resin sealers and chemically reactive penetrating sealers. But the best thing to do is to get a sealer that meets your needs and demands no matter the cost. Eagle Armor Seal is one of a handful of interior concrete sealers we tested. When brushing it onto our paver, the liquid sealer looked a lot like milk, but within 30 minutes, the whiteness cleared up and we began to see a sheen. This product is designed for indoor concrete, which often has a smooth surface, so since our testing paver was more porous than a typical interior concrete floor, we added a second coat after waiting the recommended 4 hours. There are a number of different factors you need to consider when you are purchasing a wet look paving sealer, so let’s take a look at these in further detail.