tado° Smart Radiator Thermostat - Quattro Pack, Add-ons for Multi-Room Control, Intelligent Heating Control

Product Information

They already do something like that, I read somewhere the temp measurement you see is not a direct measurement, the TRV has 2 sensors, one closer to the the radiator and one further away in an attempt to compensate for radiator heat. They also average the reading over quite a long time. If using the valve itself you would need to make sure its connected to system and done its calibration. Then pop off the top ( taco sign) remove ribbon cable all with batteries inside.

Tado comes as a series of components, which you piece together depending on what you need. At the minimum, you’ll most likely start with the Smart Thermostat itself. This can control an entire home, or it can be used as an external sensor if you add smart radiator valves to your system for individual room control.

In This Article

With the hardware installed we then needed to set up our heating schedules, and this is where things got a lot more complicated. Removing batteries and popping cable will then give you an error on your app ( calibration) but my short initial testing showed it still monitored temp and triggered heat. Window detection is configurable on a per-room basis, both as a toggle switch to turn the feature on or off, and a setting to choose how long it lasts for. For our test we went with a complete Tado installation consisting of a central Smart Thermostat aided by four Smart Radiator Thermostats. This would ensure that the upstairs rooms (which tend to be a lot colder than the rest of the flat) could be heated in line with the rest of the building.

By default, the Tado app now warns you when you leave your home, or it detects that a window is open, asking you to turn your heating down or off. Upgrade to Auto-Assist and both features are automated, so your heating will turn down when everyone goes out, and your heating will turn down when it’s detected a window or door is open. When you are trying to maintain a constant temp with a luke warm radiator, I can see this working somewhat. But when you are heating from cold to much warmer, and you have a glowing hot radiator and you are trying to guess room temperature by comparing 2 sensors mounted a few cm apart, I dont think this is feasible. An overall energy saving of 15% is excellent, but what’s more impressive is that Tado’s system managed to do this while keeping our flat feeling lovely and warm. We didn’t have to sacrifice any heat to save energy, and that feels like what smart heating should be all about. John Lewis plc, registered office: 171 Victoria Street, London SW1E 5NN. Authorised and regulated by the Financial Conduct Authority (Register no. 724309) for the purpose of introducing the credit provided by Creation Consumer Finance Ltd, registered office: Wellington Buildings, 2-4 Wellington Street, Belfast BT1 6HT. The central thermostat is a fairly nondescript white square with a small button on the lower right which you use to wake it up and show you the current temperature.Open Window Detection* - lets you effortlessly turn off your heating for a short period when it notices open windows or doors

This kit includes four add on Smart Radiator Thermostats. Please note, the Internet Bridge is required for them to work, which is sold separately, as part of tado’s starter kits. The Smart Radiator Thermostat uses your phone’s location to control a room radiator. It turns the heating down when no one is home and starts to pre-heat when it detects the first person returning. tado’s Smart Radiator Thermostat gives you smart heating control. It’s used in place of conventional radiator thermostats, letting you control your heating system remotely with the tado app (available on iOS and Android).

Easy to self-install when replacing an existing Thermostatic Radiator Valve (TRV), can be mounted both vertically and horizontally, depending on the type of radiator SENSOR: so the Smart Radiator Thermostats are reading the temperature close to the radiator (which is higher than the actual room temperature). When the temperature is reached (offset or no) the valve closes, the radiator gets colder and the Smart Radiator Thermostat is starting to measure the actual room temperature. The sensory data is performing correctly. A thermostatic radiator valve allows you to set a radiator at a different temperature, so you can heat your home only where required. This can help reduce your home's energy consumption. Failing that, as others have pointed out, there's a plethora of other 3rd party smart home devices that read room temperature (I'm looking at my echo right now which is one such device). How about integrating with these if a Tado 1st party hardware solution isn't feasable? Whereas Nest utilises a single thermostat that’s only capable of reading the temperature in one room and adjusting the whole house’s heating, Tado’s system adds a series of internet-connected radiator valves to read and adjust your heating across all the rooms in your house.

With the V3+ app you get a cleaner homescreen. Each room is displayed in its own tile, complete with the current room temperature and the set temperature. That makes it far easier to get a view of what’s going on at a glance. Large items (delivered by two people, such as appliances and furniture) can be returned using our Home Collection service. The choice is handy, as you can stop someone from dialling up the heating for too long and wasting energy. Impressively, the settings are per room, so you can have different choices for different places in your home. Tado, please if you're reading these threads - In the meantime, can you at least allow us to dynamically apply the offset. For example only apply it when the TRV is calling for heat. This review covers the V3+ version of the hardware and app, although many of the features are similar to the older version – although the older app’s layout is clunkier and harder to use. Since I first reviewed this system, Tado has updated its hardware and now sells a cheaper wireless temperature sensor to give more accurate room control. Design and installation

Smarten up your radiators, not just your thermostat

We’ve already discussed many of Tado’s features such as the thermostat, radiator valves, and Tado app, but there are a couple of extra features that are worth touching upon. The tado Smart schedule allows you to fully personalise your heating and is only active when someone is at home