Clear water Hot Tub, Pool and Spa Test Strips x 50-3 in 1 - Measures Chlorine, PH and Total Alkalinit (Pack of 1 (50 Strips))

Product Information

Chlorine is a sanitiser that controls and prevents bacteria growth and is essential for the hot tub water to be clean and safe to use. The recommended Free Chlorine* level in a hot tub is 3-5ppm (parts per million).

Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user. Not balancing the Total Alkalinity levels in your hot tub can cause a number of issues that can impact your spa experience.Chlorine demand of water too high at start up, after holidays or due to excess contamination or neglect For low TA levels below 80ppm you will need to use Total Alkalinity Increaser. The amount of TA + you need to add to your hot tub depends on the volume of water and how low your readings are. As a guide - a hot tub of 1,000 litres requires 18g to raise Total Alkalinity levels by 10ppm (parts per million).

Clearwater Multifunction Tablets are an effective and hassle-free way of maintaining clear and healthy spa water. They contain a combination of chemicals that act in a number of ways. These slow-release tablets contain chlorine, algaecide and water clarifier. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule. Never use unlabelled chemicals and please read the instructions before use. Avoid getting chemicals in eyes, on skin or on clothing. Avoid breathing vapours when opening a container. Avoid creation of dust. Never add water to the product. Always add product to large quantities of water. Use separate clean dry utensils for each chemical and clean after use. Do not add the product to any dispensing device containing residuals of other products. Never mix different chemicals in concentrated forms. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur. Dissolve the quantity of Chlorine Granules in a jug of warm water and pour into your hot tub. Activate the AirJets for a few minutes to circulate the chemicals evenly throughout the water. Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds.Remove the cover from Lay-Z-Spa to allow evaporation of the chlorine (keep the filter running constantly).

The Clearwater Dip Tests are manufactured by the founders of dip testing in the USA and are the most accurate available on the market so you know you’re getting an accurate reading every single time. Every attempt should be made to avoid mixing spilled material with other chemicals or debris when cleaning up. Do not attempt to reseal any contaminated drums. Do not transport wet or damp material. Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine. The Clearwater® Dip Tests are manufactured by the founders of dip testing in the USA and are the most accurate available on the market so you know you're getting an accurate reading every single time.Chlorine levels of a spa should be 3‑5 ppm, pH levels should be 7.2‑7.6 and Total Alkalinity levels should measure 80‑120 ppm. This TA Increaser helps raise Total Alkalinity levels, which in turn will help control pH levels and chlorine. The hot tub test strips highlight, chlorine levels, the water's pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level. If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip.